Services

Energy Audits

We offer Energy Audits for all industrial utilities. Key deliverables of our audits are.

Efficiency of utility generator.

  • This will help you to compare between actual efficiency and best efficiency.
  • This will also give you cost of generation of utility.
  • This will also give you details about the areas in which the improvement is needed such as fuel firing system, blower RPM/Design, Cleaning.
  • Finding of the report will help in increasing steam to fuel ratio or reduction in power consumption for compressors, pumps etc.

Distribution net work analysis

In distribution network you will receive schematic of your distribution system, including various pipe sizes, accessories etc. Various different sections including their machinery connections will be shown on the diagram.

  • This will give idea about distribution network of particular utility system within your plant, which can help you to operate and maintain your plant, carryout trouble shooting etc.
  • Pipeline sizes, valve types will be cross checked with required flow rate. We will provide correct sizes and valve types for efficient operation of the plant.
  • Insulation thickness and condition will be checked and radiation losses will be provided. Leakages of the system and leakage losses for the utility will be provided.
  • Overall consumption of utility will be identified.
  • Recovery network analysis Areas of heat recovery and utilisation will be identified. Various options along with schematic details, budgetary costing and payback period will be provided. In case of condensate recovery systems, traps will be checked for their type, size as well as operation. Various options available for maximizing condensate recovery factor will be explored and feasible options will provided in the report. Options available for waste heat recovery from exhaust of DGs, Furnaces as well as hot effluents will be explored and feasible options will be provided in the report.
  • Options for saving in electrical energy in case of pumping systems and compressed air generation system will be explored. Feasible options will be included in the report along with schematic details; budgetary costing and payback period will be provided.

Projects consultancy for basic and detailed engineering

  • We study the process, understand process requirement for utilities such as steam, water compressed air, Gases etc.
  • We develop design report which includes basis & selection of utility generators like boilers, compressors, water treatment plant.
  • Design report also includes distribution philosophies like number of distribution headers, tanks, pumps, control loops etc.
  • Process & instrumentation diagrams. This has pipeline sizes, material of construction, selection of valves control loops etc.
  • Piping layout drawing – this includes actual pipeline routing, sections, elevations sizes, support dimensions etc.
  • Piping Isometric Drawings- These provides three dimensional views of pipelines, shows locations of various valves, flow meters, gauges etc. These also show various different elevations of the piping system.
  • We provide detailed bill of material for the pipeline fittings and accessories with detailed specification and accurate quantities to ensure right quality and quantity of material is being procured.
  • We Provide detailed insulation specification and BOQ to ensure min heat loss through the system.
  • We provide fabrication drawings for various types of tanks such as Feed Water Tanks, Bulk oil storage tanks, Day oil storage tanks etc.
  • We also provide design for fuel handling system including tank farm layouts as per petroleum act.

Key Benefits of our Consultancy Services

  • Correctly sized utility generators ensure uninterrupted supply of utilities to process at an optimum cost.
  • Correctly developed layout helps in safe and easy operation and maintenance of the plant.
  • Right selection of pipe routing and size can reduce capital investment as well as ensure proper supply of utilities to process.
  • Ensure lowest operating cost through various heat recovery systems such as effluent heat recovery, heat recovery through exhaust of DGs, Boilers etc., Boiler blow down heat recovery, Max. Condensate recovery factor. Proper selection of insulation material, density and thickness.
  • All design as per applicable international codes.
  • Calculations are provided for pipeline size, pressure drop, wall thickness, Heat & Mass balance etc.
  • Robust plant monitoring system with right type of flow meters and gauges to continuously monitor performance of the system.

 

Project Management services

In project Management services we provide following

  • Detail Tender specification for fabrication and erection of systems.
  • Schedule for entire project with important mile stones as per the clients need.
  • Quality Assurance plan for the project.
  • Detail estimation of Man-power and consumables and machinery required.
  • Inspection of raw material.
  • Planning of day to day work
  • Supervision of daily work
  • Keep updated to key people about project schedule and obstacles which needs to be cleared for timely completion of the project.
  • Commissioning assistance for systems.

Key Benefits of our Project Management Services

  • Adherence to design and specifications for material and workmanship.
  • Close track of project schedule to enable timely completion of the project.
  • Submission of comprehensive project documentation for future reference.

Feasibility studies

We provide feasibility studies for

  • Co-Generation projects
  • Fuel change over project for boilers and heaters.In this we give detailed report after studying site conditions as well a various limitation and requirement of plant, in which we include.
  • Tentative options of layout.
  • Asses space requirement and availability.
  • Proposed Schematics.
  • Bill of materials and specification for the modification
  • Time and cost for the project.
  • We give our recommendation whether the project should be implemented or not with detail benefits or bottlenecks.

Utility system trainings

We provide basic and advance training on important utility distribution systems such as steam & condensate, compressed air , water, chilled water, hot water, thermic fluid in order to,

  • Give basic details for project or maintenance team about the various aspects of the utility system.
  • Give guidelines for trouble shooting of some typical problems for various system components such as boiler, control loops, condensate traps, pumps etc.
  • Bring awareness about various energy conservation avenues available in different utilities.

Utility systems trouble shooting

We provide trouble shooting services for various utility systems for following problems.

  • Not achieving desired temperatures in the process.
  • Not getting enough pressure of the utility for the process to take place.
  • Heating or cooling rate has reduced.
  • Failure of particular valve, gaskets
  • Over consumption of electricity in pumps and compressors.

Utility system O & M contracts.

We take O & M contracts of all kind of utility systems on man power basis for all industrial utilities such as Boiler, Compressors, Chillers & cooling towers. This helps our clients to sustain energy saving achieved.

Erection and commissioning of equipment’s and utility generators

We have exhaustive knowledge about various utility system because of which we can ensure proper erection and successful commissioning of various utility generators such as boiler, compressor, cooling towers.

Turnkey project contracts for utility systems.

We take turnkey project contract (design, procurement, fabrication, erection, insulation, commissioning for all IBR/NIBR industrial utility distribution systems)With the help of  proficient engineers, technician and excellent stock of tools and tackles we ensure that project is completed on time with conformance to high quality standard.

  • Key benefits of our turnkey project contract s are adherence to design specification for material, welding procedures, maintenance of slope, proper draining & venting.
  • Reliable and robust system.

Turnkey project contracts for Solar Hot water Systems.

We take turnkey project contract for installation of solar hot water system and integrating it with existing hot water distribution network with minimum changes and lowest possible operating cost. Solar Hot water system can be installed from 100 LPD to 3000LPD capacity. These can save good amount of energy throughout the year. Exact saving will vary based on the local climate.